Alarm system Centurion X-Line with auto start and screen backlight

Method for setting up Centurion systems

Typically, a car alarm is programmed as follows: by pressing the service button, an option number is selected, and the value is set using the key fob.

In our case, the process looks simpler:

1. The ignition is turned on and off 3 times;
2. The service button is pressed (2*N – 1) times, where N is equal to the table number;
3. Press and hold the button again - N short beeps and one long beep will sound;
4. The button is released and a new value is selected by pressing the keys on the key fob.

The first option always corresponds to button 1, the second to button 2. Press and the values ​​will change: 1, 2, 3, again 1. To select options with higher numbers, paired combinations are used, such as 1-3, 2-3, etc. .d.

Standard security features

There are two types of options: those related to autostart, and others related to security. All options of the second type are collected in tables 1 and 2. How to access them was discussed above - the number N is equal to “one” or “two”.

Frequent problems and solutions

There are situations when autostart does not work on the Centurion S8, Tango v1, IS 8 or other models. The reason may be erroneous sensor readings, incorrect operation of the central locking system, malfunctions, incorrect settings and a discharged battery. In the most difficult cases, the cause may be technical faults.

If you cannot enable autostart on the Centurion alarm system, try the following:

1. Check that the settings entered are correct.
2. Inspect the condition of the sensors.
3. Adjust the operation of the central locking system.
4. Check neutral operating conditions.
5. Measure the voltage at the battery, etc.

If you cannot resolve the issue on your own, you may need the help of specialists at a service station.

In the comments, share how you managed to enable autostart on the Centurion alarm system, what difficulties arose, and how you managed to solve them.

Selecting an autorun algorithm

Be aware that autorun will need to be enabled:

1. Press the F button for 3 seconds;
2. Press the F button 3 or 4 times - this will start by timer or temperature;
3. Each press of button 3 causes the “START” icon to appear or disappear.

When turned on, three beeps follow, and when turned off, four beeps follow.

You can change all values, that is, interval and temperature, like this:

1. The F button is pressed for 2 seconds;
2. Press button 3;
3. By pressing buttons 1 and 2, select one of the icons labeled “START”;
4. Press button 3;
5. Complete the selection by pressing buttons 1 and 2;
6. Wait 10 seconds.

In general, nothing complicated.

See what option 4-7 looks like. The first option, according to the instructions, implements the following algorithm:

1. The temperature is checked at the specified time.
2. Let's say it is below the set value. Then it will start.

The focus is only on temperature. But time also matters if we talk about “option 1”.

How to put a car on autostart

Before you enable autorun in Centurion, you need to understand the features of its operation. The alarm can start the engine in two formats:

1. Remote start.
2. Automatic start at certain time intervals or temperature.

To start the car using the Centurion alarm key fob, check that the following conditions are met:

• the hood is closed;
• ignition is turned off;
• the handbrake is released;
• the program neutral is set for manual transmission/manual transmission or the knob is in “P” mode for automatic transmission.

If any of these points are not completed, the engine will not start.

When autostarting, the indicator begins to glow continuously, the Centurion alarm key fob emits a melodious sound, and the inscription St. appears on the screen. The starter turns on for a certain time, which increases by 0.2 s with each unsuccessful attempt.

Here are brief instructions on how to start a Centurion alarm with auto start using a key fob. First, make sure that the conditions discussed above are met. The program neutral mode of manual transmission has the following form:

1. Place the gearshift knob in the neutral position, and for the automatic transmission in “P”.
2. Raise the handbrake and make sure the hood is closed.
3. Remove the key from the ignition, open the doors, get out of the car and close the doors. If the doors do not close or cannot be opened using the remote control, check the functionality of the system.
4. Turn on security mode.

After this, you can figure out the question of how to start the engine on a Centurion alarm with auto start. To do this, press the button with the lock closed, lock it and hold it in this position until a sound signal appears. After this, click on the “*” of the key fob. Three light signals appear and a melody sounds, and a smoke icon appears on the display.

To stop, just press and hold the key with the lock open until a sound appears, and then press “*”. The car stalls and the smoke icon disappears.

Types and models

The manufacturer offers a wide range of models, consisting of several lines. Each Centurion alarm has distinctive features:

• products I-10 and I-20;
• model IS-10;
• one-way alarms 03, 05, 07;
• product line IX-10, IX-30;
• IG alarm collection (20, 40, 50);
• classic security system X7, X6;
• multifunctional security system S (9, 10), F50;
• models with one-way communication 03, 05, 20.

Security systems with engine start function

Among the Centurion security systems with auto start, there are several models: F50, S9, S12, IS-10. Such devices are characterized by the presence of a wide range of options. The list of features also includes an engine start function.

According to the operating instructions, any of the presented models can be installed on cars with diesel and gasoline engines. Manufacturers have provided the possibility of using the system with manual and automatic transmission.

One way alarms

The Centurion one-way car alarm is an inexpensive car security system that has a basic set of options:

• central locking;
• presence of a shock sensor;
• siren;
• engine blocking function;
• opening and closing doors using a key fob.

There are several such devices in the company's catalog: models 6, 7, 15 (with a radio signal), 03, 05, 20 (with a flip key), I-10 (with engine blocking).

Two-way security systems

This list should include devices such as IX-10, IX-30. These models are equipped with all the features for ease of use:

• the presence of a dynamic code, which increases protection against theft;
• communication channel control;
• turbo timer;
• closing the windows automatically in security mode;
• shock sensor 2 levels;
• remote opening and closing of the trunk;
• car lock control relay.

GSM/GPS systems with tracking function

Such devices have rich functionality, but their distinguishing feature is the ability to determine the location of the car using base stations.

There are several such systems in the Centurion catalog: IG-20, IG-40 and IG-50.

Car owners are also offered an alarm system with a tracking option - IT-10.

Functions

X-Line budget alarm functions:

• car security with warning signals via siren or lamps;
• support for “silent” protection mode;
• transmission of alarm information to the communicator;
• pre-unlocking the driver's door;
• trunk lock control;
• autostart;
• built-in battery charge indicator in the communicator;
• polling of protected areas when placing them under protection with display of non-working elements on the display;
• screen backlight;
• blocking remote control keys.

Advantages and disadvantages

Advantages of car alarms indicated by owners:

• easy connection and configuration diagram;
• autostart is provided;
• there is feedback.

The disadvantages of the Centurion X-Line signaling include:

• poor protection of remote controls from moisture penetration;
• errors in accompanying documentation;
• outdated design (no support for digital buses);
• used to encode a frequency modulation signal.

How to determine the model

If you need to find out the model of the security system by the control panel, then professionals recommend using one of several methods:

1. Detailed inspection of the remote control and its keys. On many models, the type of product is indicated on the keychain. If such information is provided by the manufacturer, the inscription is in small print. One possible solution to the problem is to use a magnifying glass.
2. If the first option does not produce results, you should study the design of the key fob. Many car alarm models have an original design.
3. The last possible option is to contact an auto electrician or service center. You should resort to this method if you yourself do not recognize the type of product from the keychain.

How to use autorun

Many questions arise about how to use Centurion autostart. If programmed correctly, the automatic start is triggered taking into account the set time and temperature. In this case, the corresponding icon appears on the display. If the start is unsuccessful, the system makes another attempt.

After the set period has elapsed, the engine stops and the warning lights flash four times. In this case, the LED indicator stops lighting, and the inscription r00 appears briefly on the key fob.

Advantages and disadvantages

The Centurion alarm system is in demand among car owners for several reasons:

1. Wide range of prices. The catalog contains expensive products with a wide range of functions and cheaper ones with standard capabilities.
2. Simple, convenient installation without the involvement of professionals.
3. Detailed instructions provided in the kit.
4. Durable remote control housing. Thanks to this, using the key fob becomes more convenient and safe.
5. Availability of multi-level shock sensors. This makes it possible to detect hacking attempts.
6. Inclusion of an immobilizer in the kit, which increases the level of protection.

Based on user reviews, there are no significant shortcomings.

How to install

Installation of the system is carried out according to the user instructions in several stages:

1. Installation of the block. The device should find a place in the cabin. The device must remain unnoticed by intruders, and also be protected from moisture and heat.
2. Antenna adapter installation. It is installed on the top of the windshield. This location provides a good signal.
3. Securing the siren. It is placed in the engine compartment as far as possible from the cylinder block.
4. Service button. It is necessary to choose a place so that it is not visible to the thief, but if necessary, the driver can quickly reach it.
5. Shock sensor. The best place for this part is the ceiling in the cabin.
6. Safety elements. They reduce the risk of system failure due to network problems.
7. Connecting all elements to the block. To do this, you can use the tools provided in the kit.

Connection diagrams

For the correct functioning of the security system, you must follow the connection diagram:

1. The wire is white. It is connected to the right and left sides of the light signals.
2. Black cable. This is “ground”, such a wire should be connected to the car chassis.
3. Red cable. It connects to the +12V circuit.
4. The wire is brown. It is necessary to control the Centurion security siren. Such a cable can be connected to an autonomous siren via a white cable or to a non-autonomous siren via a red cable.
5. Green (with 3 pins).
6. Orange. This cable has 4 pins and is designed to control the shock sensor.

User manual

Before you start using the Centurion security system, you must study the instructions for use in detail. The list of main security measures includes several:

• When exiting the vehicle, be sure to close the doors and windows and put the handbrake on the vehicle.
• Control panels should be kept away from children.
• When the engine starts automatically, you should not leave passengers in the cabin.
• If there is any malfunction of the Centurion anti-theft car alarm, you should contact the service center for repair or adjustment.

How to register a key fob

Before starting work, you must register the key fob. To do this, you can use the step-by-step guide:

1. The ignition is turned on three times and turned off twice. There is no need to turn it off a third time.
2. Immediately after these steps, press the service button 2 times briefly and 1 time for a long time. If you hold for a long time, there should be a siren sound.
3. Long press any button on the key fob.
4. To exit programming, you must turn off the ignition. The programmed key fob will be confirmed by 3 light and sound signals.

How to enable autorun

In order for the Centurion car alarm to start the engine automatically, this function must be enabled. You can do this as follows:

1. The key fob button is pressed twice. This action will turn on the side lights and lock the doors.
2. The engine will start after 5 seconds.
3. When the engine starts, the lights will light up uninterruptedly, climate control and other options will be activated. At this time, a countdown timer will light up on the key display, indicating how much longer the engine will run after autostart.

After the time has expired, the timer will return to standard mode.

Is it possible to enable autostart based on temperature or time?

Now let's look at how to configure autostart on the Centurion S9 alarm system to work based on temperature and time parameters.

How to enable autorun at a specific time

Using this option, you can start the engine at a specific moment. To autostart Centurion, do the following:

• Make sure the clock is set correctly.
• Set an alarm for a specific time to start the engine. An inscription with a bell symbol should appear.

• Enable the start function on the Centurion alarm at a certain time using the clock icon. To do this, press and hold “*” until a melody and a short sound appear, then release the button and use the same symbol to select the desired option. One light appears, a melody sounds, and a bell symbol appears next to the clock icon. The start time appears on the display for a while, after which the information is transferred to the current time. The indicator will flash in a series of two flashes.

Knowing how to enable auto start on a Centurion alarm system from a key fob, you can set it to any time. As soon as it fits, the system starts the engine, and the option itself is automatically deactivated.

How to enable periodic launch

If desired, you can set the automatic engine start interval. The alarm allows you to set periods of two, three, four or 24 hours. Here you need to know which buttons to press to install Centurion autorun.

Take the following steps:

• Activate the hourglass icon. To do this, press “*” until a melody and a short signal appear. After that, release the button and “*” select the desired icon.

• If everything is done correctly, a melodic signal appears, the desired icon appears on the screen, and a light signal appears. The LED indicator will flash in a series of two flashes.

To disable an option, simply deactivate the desired function.

How to turn on by temperature

Of no less interest is the question of how to enable auto start on the Centurion alarm key fob to start the engine based on temperature. This option allows you to start the engine when the temperature drops below -5, -10, -18 and -25 degrees Celsius. Automatic temperature start is carried out regardless of the set time or periodic start.

To enable automatic start based on temperature, take the following steps:

1. Press “*” and hold it until a melody and a short signal appear.
2. Release the key and use “*” to select the thermometer icon (the third one, after the hourglass).
3. The programmed temperature and the above icon appear on the screen. If the sensor is faulty or not connected, the Centurion auto-start alarm will not work.

To change the temperature, do the following:

• Click on Jack six times.

• Turn on the ignition, after which the indicator will light up six times and the siren will sound.
• Click Jack four times.
• Press the corresponding key fob button. Closed lock - -50C, open lock - -10 0C, asterisk - -180C, closed lock for more than three seconds, and then one second - -25 0C.