Detailed review of the Sherkhan Logicar 1 car alarm: characteristics and differences, installation, configuration and operating instructions

The Scher Khan Mobicar 1 security system today is one of the most progressive and reliable alarm systems on the market. The system is equipped with a variety of high-tech devices that make it possible to implement both the main functions of protecting the vehicle and additional ones related to eliminating the consequences of user inattention. Not many people know what this model is capable of.

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

We'll talk about this in more detail later in the article.

Features of the Scher Khan alarm system

The system has a small body, into which the creators of Mobicar 1 tried to invest in their creation the maximum technological developments of recent years. Among the main distinctive functions it is worth highlighting:

• Encoding capability. At the same time, data transfer is protected from third-party influence by confirming commands by the car owner;
• Continuous two-way communication. Signal strength in city conditions is ensured by a given frequency of 868 MHz, which has low congestion;
• Processing unit with many sensors. The system will report a change in the angle of inclination of the vehicle, an impact on the body, or movement of the vehicle;
• Personalization. The sensitivity of each sensor can be adjusted based on operating conditions;
• Possibility of autostart regardless of gearbox type and engine model. Starting is done using the key fob. There is a possibility of delayed start at a set time or at a set temperature;
• Convenient external device (key fob). Equipped with a liquid crystal screen with Cyrillic support, which records readings from all sensors. For example, you can find out whether the trunk or hood is open, whether the ignition is on, the engine operating mode, the presence of two-way communication, and much more;
• The security system has a unique PIN code, which the manufacturer sets at the factory. It is designed for emergency disabling of security functions and against unwanted registration of other key fobs in the device’s memory;
• Slave mode allows you to control the Sherkhan Mobicar 1 system using a regular car key fob;
• Implementation of CAN, K-LINE and LIN-BUS buses;
• Turbo timer. This function automates the cooling process of the engine, provided that it is equipped with a turbine.

Scher khan logicar 1 how to enable autostart

And only if the option of installing a normal alarm in the near future is irrelevant, taking into account the above, you can at least somehow use it. This alarm has a minimum of settings, but they are still divided into two menus.

To enter the programming menu, while the car is disarmed, hold down the combination of the following keys for two seconds: After the siren gives a short signal, briefly press button 4 to select the appropriate function.

After each press, one signal is given. As soon as you stop having dialed the desired number, the alarm will emit a number of signals equal to the value of the corresponding function. Now, by pressing buttons 1 to 4, you will set a new setting. If you need to configure more than one function, you will have to start each new step from the beginning.

The following functions are responsible for the operation of autostart: Function 1-1 (hereinafter the function number is indicated in the format “menu number-function number): delay between turning on the ignition and cranking the starter.

A value of 1 sets a delay of 4 seconds (gasoline engines), 2 – 10 seconds (diesel engines).

Function 1-6 sets the start reservation method on vehicles with manual transmission. Options 1 and 2 set auto-reservation, and in option 1 the alarm will always try to pick up the ignition, and in option 2 - if the doors are closed. The only really workable backup option here is 3; ignition interception will occur by long pressing button 2 on the key fob.

Function 1-7 limits the starter cranking time. Considering the absence of a tachometer input, which allows you to accurately cut off the starter, and not twist it when the engine is already started, strive to use this function at value 1 (minimum time), and only in winter you can set option 2. Activate option 3 only if the engine starts difficult - otherwise you will get guaranteed overexposure and accelerated wear of the bendix.

Function 2-3 activates periodic starting by timer: in value 1, the engine starts only at the time set on the timer, in option 2 - every 2 hours after this time. Function 2-4 determines the duration of the motor operation: 15 minutes (1), 25 minutes (2), 45 minutes (3), 5 minutes (4).

Video: Control and configuration of Scher-khan magicar Other alarms of the Magicar family Other alarms of the Scher-Khan Magicar have a tachometer input, for the operation of which it is necessary to learn the idle signal.

On the Magicar 4 alarm, this is done using a button under the cover; on other models, training occurs while the Valet button is pressed. Moreover, for Scher-Khan Magicar 5 you also need to correctly set the type of control and start duration with switches: switch DIP1 is set to the ON position (tachometer input), DIP2 sets the warm-up time to 15 minutes (OFF) or 25 minutes (ON) for gasoline engines.

If the glow plug inputs are connected to the vehicle wiring, then 25 and 45 minutes are used respectively. Please note that neither the duration of operation nor the type of engine can be configured through the menu, everything is set by switches and the method of connecting the alarm.

Security and safety

Ensuring vehicle security is the main reason for purchasing a security system. The creators of Mobicar 1 took this issue seriously, not forgetting to fill the system with many innovative solutions. These include:

• Preventing road accidents. This is achieved by triggering an alarm when the vehicle brakes sharply. Other road users will be able to make a decision in time to avoid an accident.
• Encryption of signals and use of a special radio frequency;
• Sensors that allow you to monitor the possible movement of a car in space from a distance;
• "Parking with engine running" function. Based on the name, you can imagine what this mode is like. It allows you to leave the vehicle with the ignition keys, leaving the engine on. Any abnormal event will shut down the engine.

Instructions

Download:

Operating instructions for Scher Khan Mobicar 1

Tired of paying fines? There is an exit! Forget about fines from cameras! An absolutely legal new product - Traffic Police Camera Jammer, hides your license plates from the cameras that are installed in all cities. More details at the link.

• Absolutely legal (Article 12.2);
• Hides from photo and video recording;
• Suitable for all cars;
• Works through the cigarette lighter connector;
• Does not cause interference to radios and cell phones.

Find out more Subscribe so you don't miss anything important

• How to set up auto-start alarm system Scher-Khan

Instructions and files

User guide

Content

• Preparing the key fob for use
• The main purpose of the key fob buttons

4 DISPLAY SYMBOLS

• Indicators of security and alarm modes
• Indicators of autorun operating modes
• Other operating mode indicators

5 ARMING MODE

• Activating security mode without vehicle beeps
• Disabling the shock sensor for the current security period
• “Polite backlight” when the security mode is turned on
• Long-term switching off of vehicle sounds

6 ALARM MODE

• Missed alarm reminder function

7 DISARMING THE ARM MODE

• Alarm indication
• Disabling the security mode without vehicle beeps
• Emergency disarming of the security mode
• Automatic return to security mode

8 “AUTO SERVICE” MODE

• Scher khan logicar 4 how to set the clock

• Enabling the “Car Service” mode using the button on the antenna module
• Turning on and off the “Car service” mode using the key fob

• Remote engine start
• Setting up automatic engine start
• Getting started in automatic start mode
• Programming the tachometer signal

• Specifications
• Shock sensor
• Long-term shutdown of the shock sensor
• Tilt and motion sensors
• Emergency brake sensor
• Changing your PIN
• Registration of key fobs in the system memory
• System action when pressing key fob buttons
• Menu No. 1
• Menu No. 2
• Optional Components
• Autorun error codes

User manual

The document that users need to study before using the Scher-Khan Logicar A car alarm is the operating instructions.

Designations of buttons and symbols on the key fob

To bring the communicator into working condition, you must install the battery. The correct battery polarity is indicated inside the battery compartment.

The key fob is equipped with 4 buttons. To trigger the alarm functions:

• single, short press - 0.5 seconds, long press - 2 seconds;
• pressing the key combination short and long.

The security mode is activated by briefly pressing key 1. The system will close the locks, block the starter and ignition system. The security mode can be canceled by briefly pressing button 2.

A short press of key 3 turns on the key fob screen backlight for 10 seconds. Button 4 enables checking the system status. Simultaneously activating keys 3 and 4 for 2 seconds will enable or disable the locking mode of the communicator control buttons.

The LCD display shows system status information in the form of icons and symbols. The antenna symbol appears on the display if the vehicle is within range of the communicator's transmitter. The battery image shows the charge level of the power supply, 4 letters Z - enable VALET mode. The digital indicator informs about time, temperature and voltage in the machine’s on-board network.

The lock image shows whether the vehicle is protected by the system or not.

The speaker symbol informs about the start of the siren, the crossed out hammer - deactivates the shock sensor, and the image of a cell phone - activates the vibration alert.

The icons on the key fob displays are intuitive. The image of burning headlights indicates that the light alarm is turned on, and a cloud of exhaust gases indicates that the car’s engine is running.

Pager programming

Programming the Sherkhan Logicar A car alarm key fob allows you to save the codes of 3 communicators in the system memory. For this:

1. You should disable the security mode and turn on the car ignition.
2. Press and hold the call sensor key for 2 seconds. The hazard lights will flash 1 time.
3. In a 5-second period, press the sensor button once. If PIN entry mode is not activated, the lights will blink twice. When the mode is turned on 1 time, then you need to enter the PIN, the system will turn the hazard lights on and off 2 times.
4. The LED will light up, which confirms that the system is ready to record the communicator code.
5. You need to press key 1 on the key fob once; the system allocates 5 seconds for this procedure. Then repeat this operation on key fobs 2 and 3. When recording the code, the lights will flash 1 time.
6. After recording code 3 of the communicator, the lights will blink 2 times and the system will return to normal mode.

Operating modes

The car alarm supports several operating modes of the security system:

1. When you open the doors or trunk of a car that has the security function turned on, the alarm mode will go off.
2. When the communicator receives a danger signal that has not been deactivated by pressing keys 1 or 2, it enters reminder mode by emitting audible alarms.
3. When you hold down key 1 of the key fob for 2 seconds, the “panic” mode will turn on when the engine is off or the JackStop mode otherwise. The siren will sound and the car doors will lock.

How to enable autorun

To enable autostart mode using a timer, the car must be armed, the time has been set on the communicator, and autostart has been configured. Actions that enable automatic startup mode on the communicator are to simultaneously briefly press keys 2 and 4. Timer will appear on the display.

Specifications

List of technical capabilities of the Mobicar alarm:

• remote connection with the central unit;
• automatic central locking while driving;
• digital sensor that recognizes impacts, tilt and movement in space;
• “Turbo” function, which allows you to change the cooling speed of the turbine;
• "Panic" function;
• a personal code that allows you to disarm the car if the key fob is missing;
• automatic ignition switching on a car with a manual or automatic transmission, gasoline or diesel engine;
• automatic switching on of the ignition after a command received from an external device;
• The engine start time can be adjusted manually;
• automatic switching on of the ignition based on thermometer readings or on-board network voltage;
• keychain with an LCD display displaying text messages in Russian;
• display of interior temperature, battery voltage and engine operating time on the key fob screen;
• built-in digital bus adapter;
• Slave function with autostart.

Equipment

The Sherhan Mobicar1 package includes:

• keychain for remote control and feedback;
• central processing unit;
• antenna;
• siren;
• contact connectors;
• user guide;
• car alarm installation diagram;
• warranty card.

Problems and their solutions

A car alarm is a complex electronic device, the abnormal operation of which can only be corrected by a specialist. After carefully studying the Sherkhan Logicar A manual, the user should not have any problems using it. It is necessary to monitor the charge of the battery in the car and the battery in the communicator.

• Alarm system Tomahawk 434 MHz Frequency autostart instructions
• Sherkhan Logicar autostart
• How to turn on the timer on Shere Khan 5
• The most reliable diesel engines for passenger cars

Alarm installation

According to the installation manual, it is best to install the call sensor on the windshield. Its cable should not be subject to mechanical stress.

It is necessary to ensure that the sensor does not come into contact with foreign objects.

Otherwise, false alarms may occur.

To install Sherkhan, you need to install the limit switches correctly. The sensors should not be damaged during everyday use of the vehicle and should not be exposed to moisture (they may oxidize due to water ingress).

Installation

Step-by-step instructions for installing a Sherhan car alarm:

1. Use plastic ties to secure the security system processor module under the front panel of the car. It can be hidden in another place that is difficult for an attacker to reach.
2. Install the radio transceiver unit in the upper part of the windshield or rear window of the car. To ensure signal reception and transmission, it is necessary to install this module no closer than 5 cm to metal parts of the vehicle. Before installation, the surface should be cleaned and degreased with a solvent. The electrical line connecting the module to the on-board network is hidden under the decorative lining of the car body.
3. Attach the LED indicator to the front glass.
4. Place the siren with its horn down and secure it under the hood of the vehicle, in a place protected from mechanical influences and high temperature.
5. Contact sensors are mounted on metal surfaces in places protected from moisture.
6. Fix the shock sensor in the center of the vehicle body with 2 bolts. On its body there are 2 adjustment knobs that allow you to adjust the sensitivity of the warning and alarm zones.
7. Install a sensor on the cooling system line that determines the temperature of the machine’s motor.
8. In accordance with the equipment connection diagram, connect and power all elements. Hide the wiring under the decorative panels.

Connection diagram

A color, detailed diagram of connecting the Scher-Khan logicar A alarm elements with the processor unit and power bus is given in the documentation included in the delivery package.