Instructions and manual for APS 1350 in Russian

(Car alarm APS 2900)

1.- 2 key fobs with 4 buttons for each remote control
3.- Anti-theft system “Anti-Carjacking”

4.- two-level shock sensor

5.- Six-tone siren is powerful

6.- Disabling the starter

7.- Additional engine blocking

8.- Door lock relay

9.- Built-in relay for controlling right/left turn signals

10.- Valet button

11.- Programmable personal system shutdown code

12.- Improved Panic function

13.- Silent activation/disabling of car alarms

14.- Arming with separate shutdown of shock sensor zones

15.- Arming without the help of a transmitter

16.- Operational temporary disabling of automatic arming

17.- NPC™ anti-false alarm function

18.- Disabling alarm in 2 modes

19.- Disabling security in 2 stages

20.- Warning about using the Valet function

21.- 2nd and 3rd channel output (for unlocking the trunk or connecting additional accessories)

22.- Car lighting control

23.- Window control

24.- Control of additional pager

25.- Multifunctional System Status LED (LED)

26.- Sound and light confirmation of commands.

27.- Car alarm warning

28.- Indication of the sensor or trigger that triggered the system

29.- Indicating and bypassing a faulty zone or circuit

30.- Positive and negative door trigger inputs

31.- Input for connecting the hood/trunk trigger

32.- Car search mode

1.- Automatic (passive) setting of car alarm

2.- Automatic arming with closing of all doors

3.- Automatic re-arming

4.- Automatic re-arming with door closing

5.- Automatic closing (opening) of doors when the car ignition is turned on (off)

6.- Active and safe engine shutdown in the “Anti-CarJacking” mode

7.- Possibility of protecting a car with the engine running

8.- Security mode activation delay 5, 15, 35 seconds*

9.- Selectable pulse duration for controlling door locks and Comfort mode

10.- Restoring factory settings of programmable functions

No reviews have been added yet

Our tips, which I hope will help you choose a car alarm:

1. Take only reliable, time-tested and well-proven companies.

2. Don't skimp on additional features. Try to take car alarms with two-way communication and with auto start (if necessary), because the cost of installing any car alarm is approximately the same and amounts to 4000-6000 rubles. Therefore, it is not profitable to take a simple car alarm for 1000 rubles and pay 5000 rubles for installation. It is much more profitable to take a good, modern and reliable alarm system for 5000-7000 rubles and install it for the same money.

3. Do not look at the country of manufacture of the car alarm. Basically they are all made in China, but that doesn’t make them any worse.

4. It is always advisable to install an additional secret in parallel to the car alarm, which does not depend on the car alarm, because the key fob can be stolen, picked up or scanned.

5. You must always understand that no matter what the car’s security system is, it won’t be difficult for a good specialist to steal a car. You can steal almost any car, another thing is that why bother with cars that have good car alarms and mechanical anti-theft devices, when there are many cars without alarms at all.

6. You also need to understand that car alarms still signal more, but you must act yourself. If your car alarm has responded (beeped or the key fob beeped), then you need to run to the car as quickly as possible.

7. Try to buy new car alarm models. They are usually more sophisticated, have more functions, and their price is usually no more expensive than older models.

8. The quality of the final product (car alarm, its installation and configuration) greatly depends on the skill of the installer and on the use of non-standard solutions, which greatly complicates the theft of a car.

9. Take common and well-known companies. They are more reliable. The main thing is that the car alarm does not go off on the road.

10. Some car alarms have discounts. Of course, these are worth taking. You can save a lot of money, especially on expensive models.

11. For many modern car alarms, you can purchase a satellite module, which will send the car’s coordinates via cellular communications. Previously, such modules (or alarms in general) were quite expensive, but now the price for them has dropped significantly. Therefore, if before it was not advisable to take them, now it is possible to take them.

Car alarms aps, features of operation and model range

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

There are more than 20 types of car alarms, which are called APS. Each model has its own characteristics and is designed for a specific user group. Among all security systems of this type, models 2900, 2700, 2800, 1500, 1350, 2300, 7100, 1200 two and way deserve special respect. Each alarm system of this brand has its own characteristics in terms of operation, but they are all united by high quality indicators. The performance of each of these systems should be discussed separately.

APS – features of the model range, overview of popular options

Each alarm system comes with installation instructions. It is thanks to this that the motorist will be able to carry out the installation himself and save his own money. If a user is looking for a security system for his budget car, he should think about purchasing APS alarm systems, models 3900, 3800, 3700, 1350.

Such security systems have the following number of characteristics:

• one-way or two-way communication;
• user-friendly pricing policy;
• high quality indicators;
• versatility - suitable for all modern cars;
• multifunctionality - in addition to standard features, the system has a number of additional ones designed for comfort.

If the user needs a security alarm, the price of which reaches an average level, and the functional range is quite wide, he should pay attention to models 2900, 2700, 2800, 1500, 2300. Such systems have the following capabilities:

• possibility of using two-way communication;
• general or separate control of system functions;
• possibility of using two key fobs;
• presence of a powerful siren;
• possibility of programming personal codes;
• work with two-level shock sensors;
• use of additional encoding to ensure complete reliability.

Systems 2900, 2700, 1500, 2800, 2300, according to statistics, are installed more often than other alarm systems from the APS model range. The instructions for these security systems will be clear to every motorist, their compatibility with all cars has been verified, and installation is simple.

Vehicle owners who choose exclusively premium alarm systems should pay attention to the 7100 model. This alarm system is more expensive than the options mentioned above, but has the following qualities:

• presence of two-way communication;
• ability to work in several security modes;
• versatility – in terms of use for cars of different brands and connections;
• a large number of additional functions;
• ease of use;
• possibility of using additional encoding;
• intelligent burglary protection;
• using a two-step shutdown algorithm.

The 7100 security system, which cannot be connected or disabled without the participation of professionals, is very reliable. Such a car alarm will provide reliable protection for each vehicle. APS security systems, models 2900, 2800, 2700, 1500, 1350, 2300, have good quality indicators, but depending on their price the width of the functional range will be determined.

Silent arming and disarming of the system a...

Page 10

• Image
• Text

11. Silent arming and disarming of the system

a) Press and release the transmitter button to arm the system without confirmation from the siren. In this case, the direction indicators and system LEDs will function as during normal arming of the system. In addition, when the system is triggered, the siren will immediately turn on

The full 30-second alarm cycle will read and sound, and the auxiliary pager output will be immediately activated.

b) To disarm the system without confirming siren signals, press and release the transmitter button. In this case, the direction indicators and system LEDs will function as if the system was normally disarmed.

ATTENTION:

when silently arming or disarming the system, 3 and 4 siren signals (Warning about an open or faulty circuit and Pre

system alarm) will not be disabled.

12. 2-step AVP - disarming the system in 2 stages

The function of disarming the system in 2 stages (programmable function #11) allows you to further increase the anti-theft protection of your car

both from attempts to disable the security system using various electronic devices (such as the “409” device), and from the theft of your car keys with the system’s key fob transmitter.

If programmable function # 11 is enabled, then after disarming the system by pressing the button or transmitter button, the system will sound

standard confirmation tones, will unlock the car doors and disable the system triggers, but the car engine will remain locked

nom.

To disable the engine interlock circuits, turn the ignition on and within 15 seconds press and release the Valet button switch one

times, or enter your personal system shutdown code (depending on the state of programmable function # 10). You will hear 2 siren signals and will be able to start the car engine.

ATTENTION:

This function cannot be implemented when the security mode is turned off with the engine running.

13. Warning about system activation

If, when disarming the system, you hear 4 siren signals, this means that the system was activated during your absence. The LED will be

flash a certain number of times after a pause, indicating which circuit triggered the system:

• if the system is triggered by a door trigger, by turning on the ignition or by turning off the power, the LED will blink in a series of 2 flashes through

zu;

• if the system was triggered by the main zone of the shock sensor, the LED will blink in a series of 3 flashes after a pause;

• if the system is triggered by the hood or trunk, the LED will blink in a series of 4 flashes after a pause;

Information about the system activation will be erased when the ignition is turned on or when the system is armed using the transmitter.

APS 1350 “Installation and Operating Instructions”

10

© Saturn Marketing Ltd.

Prepared by AutoSet from a paper original. Car alarms and car electronics wholesale and retail.

Online store. Delivery throughout Moscow and regions of the Russian Federation.

www.AutoSet.ru (495)995-09-29

Comments

Select → I found instructions for my car alarm here! #manualza

• Click →

- You will be engaged in fraud. - But i can not. “It’s all written there in the instructions for the ointment for hemorrhoids, patient.”

Manualza!manualza.ru

Still not with us?

Connecting and disconnecting security systems

To connect alarm systems APS 1350, 1500, 2700, 2800, 2900 and others, instructions should always be used. A two-button key fob is used to control the systems. Disabling an alarm is sometimes more difficult than installing and configuring, but if you get to the bottom of the problem, it is not so difficult to solve.

In order to correctly connect the APS car alarm, models 1500, 2800, 2700, 2900, you should perform the following steps:

• read what the instructions say;
• study all the connection points that the standard diagram displays;
• make sure that the car alarm is complete with all the necessary parts for connection;
• find a place to connect the central unit by disassembling the dashboard;
• prepare the alarm for installation, lay the wiring;
• install the sensors in the manner required by the instructions;
• install an LED indicator and a siren;
• connect the wires to the light bulb, central unit, limit switches and check the operation of the system using the key fob.

Standard equipment of APS security systems

Each alarm system of this brand is distinguished by high quality indicators. The key fob always runs on batteries that last up to two years. The connection diagram for these security systems is simple, and their standard configuration looks like this:

• control key fob and spare key fob;
• main system unit;
• antenna cable or model;
• standard set of wires for connection;
• set of limit switches;
• shock sensor and other sensors;
• jack button;
• instructions for connection and operation.

This configuration is typical for security systems type 2900 and others. To control all programs and functions of alarm systems, a key fob is used, in which the batteries must be constantly changed.

Security systems of domestic production are suitable for most modern vehicles and have high levels of reliability and performance. They can perform their functions at fairly high or low temperatures. A key fob is always used to control the system, and the user can leave a spare version at home or in the car. If the key fob is broken, it will be repaired in a workshop or they will recommend buying a new one.

APS security systems are very popular in the domestic automotive market. The reliability of alarm systems has been tested over the years, becoming higher and more accessible to a wide range of users. The simple installation of the systems, ease of configuration and use, allowed car enthusiasts to fully appreciate all the positive qualities of the domestic manufacturer. Each system has a convenient and easy-to-use key fob, which allows you to create additional comfort for the motorist.

The increased level of protection against unauthorized entry is also proven by statistical data, according to which the theft of cars with APS car alarms occurs less frequently. Every motorist wants to protect his own vehicle as much as possible, and domestic protection systems help many with this. The high quality and comfortable price from the manufacturer have already attracted the interest of many users, and they were able to understand, during the operation of the systems, that they had made the right choice.

photo No. 1: alarm APS 2900

Car alarm APS 2900

installation of APS 2900 after purchase for 3500 rubles.

APS 2900 Specifications

APS-2900 is a car security system. Two 4-button programmable transmitter key fobs. Keeloq dynamic code. Anti-theft function "Anti-Carjacking". 2-level shock sensor. Powerful 6-tone siren. Starter blocking using built-in relay. Possibility of connecting two additional engine blockers. Built-in relays for controlling door locks. Built-in relay for controlling right/left turn signals. Valet push-button switch. Programmable personal code to disable the system. Improved Panic mode. Silent arming and disarming of the system. Possibility of remote activation of “silent” security mode. Arming with separate shutdown of shock sensor zones. Arming without the help of a transmitter. Prompt temporary disabling of automatic arming. False alarm protection function of the NPC system. Disabling the alarm mode in 2 stages. Possibility of disabling security in 2 stages. Valet mode warning. 2nd and 3rd channel output (for unlocking the trunk or connecting additional accessories). The ability to control the “polite lighting” of the car. Ability to control the power window module. Ability to control an additional pager. Multi-function LED System Status Indicator (SID). Light and sound confirmation signals. Warning about system activation. Indication of the sensor or trigger that triggered the system. Indicate and bypass the faulty zone or circuit. Positive and negative door trigger inputs. Input for connecting a hood/trunk trigger. Car search function. Automatic (passive) arming. Automatic arming with door locking. Automatic re-arming. Automatic re-arming with door locking. Automatic locking (unlocking) of doors when the ignition is turned on (off). Active and safe engine shutdown in the “Anti-CarJacking” mode. Possibility of protecting a car with a running engine. Security mode activation delay 5, 15, 35 seconds. Selectable pulse duration for controlling door locks and Comfort mode. Restoring factory settings of programmable functions.

Note: if the system was triggered by an attempt to turn on the ignition...

Page 9

• Image
• Text

Note:

if the system was triggered by an attempt to turn on the ignition and the ignition remained on, the alarm mode cannot be turned off with a switch

sensor, you must first turn off the vehicle ignition.

• if you then press and release any of the transmitter buttons again, you will hear 4 siren signals, the turn signals will flash 4 times and

the system will be disarmed. The LED will flash in a series of 2, 3 or 4 flashes to indicate the zone that has triggered the system (see System Trigger Warning section below).

Note:

Disabling the alarm mode when the ignition is left
on
is impossible.

9. False alarm protection function

In order to minimize false alarms of the system and not disturb others, you can use the programmable false alarm protection function (function # 8). When this feature is enabled:

• If the shock sensor warning zone is activated 10 times within 30 minutes, this system input will be automatically disabled for 1 hour (or up to

disarming the system if this happens earlier).

• If the main shock sensor zone is triggered 5 times within 60 minutes, this system input will also be automatically disabled for 1 hour (or up to

disarming the system if this happens earlier).

Disabling different zones of the shock sensor occurs independently of each other.

ATTENTION:

Disabling the shock sensor zones will be immediately canceled when the system is triggered by opening a door, hood or trunk.

10. Disarming the system. Automatic re-arming of the system.

a) Press and release the transmitter button once. You will hear 2 siren signals, the direction indicators will blink 2 times, the system will unlock the car doors

vehicle, will disable the starter interlock and the additional engine interlock circuit (if the appropriate connection has been made and programmed

function #15 is removed).

b) If the automatic re-arming function is enabled (feature #5), then after the system is disarmed, the LED will quickly flash

fire and the system will be armed again after 30 seconds, if during this time one of the doors, the hood or trunk was not opened, or was not turned on for

burning. You will hear the siren chirp 1 time, the turn signals will turn on 1 time and the LED will flash slowly. At this moment the system will also automatically

locking the car door (if function #6 is enabled), blocking the starter and auxiliary circuit, or closing the car windows (if the corresponding

appropriate connection and function #15 is programmed).

If the sensor circuit is faulty, then 5 seconds after the system is automatically armed, you will hear 3 additional siren signals, the turn signals will blink 3 more times and the sensor circuit will be bypassed.

APS 1350 “Installation and Operating Instructions”

9

© Saturn Marketing Ltd.

Prepared by AutoSet from a paper original. Car alarms and car electronics wholesale and retail.

Online store. Delivery throughout Moscow and regions of the Russian Federation.

www.AutoSet.ru (495)995-09-29

Standard features and equipment of APS 2900:

• Two 4-button programmable transmitter key fobs
• KeeloqTM dynamic code
• Anti-theft function “Anti-Carjacking”
• Programmable personal system shutdown code
• 2-level shock sensor
• Possibility of connecting an additional 2-zone sensor
• 6 tone siren
• Starter interlock using built-in relay
• Possibility of connecting 2 additional blocking circuits
• Built-in relays for controlling door locks
• Built-in relay for controlling direction indicators
• Possibility of arming while the engine is running
• Possibility of arming with the inclusion of “Turbo” mode
• Ability to control closing car windows
• Ability to control an additional pager
• Ability to control interior lighting
• Arming with separate disabling of sensor zones
• Silent arming and disarming of the system
• Ability to enable “silent” security mode
• Push-button switch “Valet”
• Multifunction LED System Status Indicator
• Panic mode
• Quick temporary disabling of automatic arming
• Manual arming without transmitter
• Disabling the alarm mode in 2 stages
• Valet mode warning
• “Car search” function
• Channel 2 output (for unlocking the trunk or for connecting additional accessories)
• 3rd channel output (for connecting additional accessories) with programmable operating modes
• Limited alarm time
• Light and sound confirmation signals
• System Trigger Warning
• Indication of the sensor or trigger that triggered the system
• System fault indication
• Bypass a faulty zone or circuit
• Positive and negative door trigger inputs

Disconnecting and then connecting the power will cause immediate...

Page 7

• Image
• Text

• Disconnecting and then reconnecting the power will cause the system to operate immediately. After the end of the alarm mode, the system will go into

“full” security mode.

c) To disable the enabled automatic engine locking mode:

- at any time with the ignition off

press and release the button or the transmitter button, the system will enter the “floor” mode

noi" security with appropriate confirmation signals of the siren and/or direction indicators;

— press and release the button or transmitter button to disarm the system;

If the transmitter is lost or malfunctions, you can also disarm the system using the Valet switch.

Note:

To perform the automatic passive engine locking function, the passive arming function (function #1) must be turned off.

6. Arming the system when the engine is running

You can use the engine running arming feature (programmable feature #9).

Exit the vehicle with the ignition on and make sure all doors, hood and trunk are closed. Press and hold the button

transmitter 2 seconds. You will hear the siren confirm 1 time, the turn signals will turn on 1 time and the system LED will flash slowly. Sis

The theme will also automatically lock the car door and automatically close the car windows (if the appropriate connection has been made and requested

function #15 is programmed), but the engine will not be locked and the ignition circuit and shock sensor trigger inputs will be disabled.

Note:

You do not have to leave the keys in the ignition if the necessary connections have been made and the system channel 2 functions (#15 and 16) have been programmed accordingly. With the engine running, press and hold the transmitter button for 3 seconds. The system will start by

supply power to the engine bypassing the ignition key. Remove the key from the ignition, exit the vehicle, and ensure that all doors, hood, and luggage

nicknames are closed. Press and hold the transmitter button for 2 seconds to turn on the security mode with the engine running.

If, when you try to arm the system while the engine is running, one of the doors, the hood or the trunk is open, the system will not arm the system and you will hear 5 short warning signals from the siren.

If in the security mode with the engine running the ignition is turned off for more than 3 seconds, then after 3 seconds the system will switch to the standard security mode: it will block the engine and re-arm the ignition circuit input and the shock sensor.

In security mode, when the engine is running, when any of the doors, hood or trunk of the car is opened, or when the power is turned off, the alarm mode will immediately turn on: the system will turn on the engine blocking circuit, the siren, the turn indicators will work continuously for 30 seconds (if

the ignition was turned off) and the output to the additional pager will be immediately activated (if this function is connected). If the ignition remains on, the alarm mode will continue until the ignition is turned off.

APS 1350 “Installation and Operating Instructions”

7

© Saturn Marketing Ltd.

Prepared by AutoSet from a paper original. Car alarms and car electronics wholesale and retail.

Online store. Delivery throughout Moscow and regions of the Russian Federation.

www.AutoSet.ru (495)995-09-29