Where is the engine number on the VAZ-2107

On VAZ cars, the identification number (VIN) is stamped and located in the engine compartment:

• VAZ-2101, VAZ-21011, VAZ-21013, VAZ-2102, VAZ-2103, VAZ-2104, VAZ-2105, VAZ-2106, VAZ-2107 and their modifications - on the bottom shelf of the air supply box on the right in the direction of travel
• VAZ-2108, VAZ-2109, VAZ-2110 – on the upper surface of the right pillar of the body mudguard (on the right front suspension spring support)
• VAZ-2121 - on the upper amplifier of the front panel on the right. In addition, there are options for the following location - on the upper reinforcement of the radiator trim panel, on the front panel next to the nameplate

For the first five years since the start of production of VAZ cars (1970-1975), the vehicle identification number was applied to the vertical wall of the air intake box on the right in the direction of travel.

The identification number (VIN) on VAZ cars produced before 1982 consisted of 11, 12, 14 and 15 characters. The last seven digital characters indicated the serial number of the product, and the first seven (eight) alphanumeric characters or four (five) digital characters, respectively, either the manufacturer and the car model, or the car model. Dividing marks are made in the form of five-pointed stars.

★ VAZ 2101 0000001 ★ I II III

★ 2101 ★ 0000001 ★ II III I—manufacturer II—car model III—product serial number

Since 1982, the vehicle identification number consists of seventeen 10 mm high characters and is enclosed between two asterisks.

Photo. Type of identification number applied to VAZ-2101-VAZ-2107 cars and their modifications since 1982.

The distance between the conventional centers of dividing signs is 106-107 mm, the height of the signs is 10 mm, the width of the signs is 4 mm, the distance between the signs is 2 mm.

★ HTA 2106 00 C 0000001 ★ I II III IV V

I - number of the world manufacturer II - car model III - signs that do not carry information (no meaning) IV - year of manufacture of the car V - serial number of the product

The body for spare parts is always produced with its own number (seventeen characters), and the marked parts of the body for spare parts are produced without a number.

Where is the engine number of the VAZ 2107

The VAZ 2107 car is equipped with a number of engines.
Initially, a 1.3-liter carburetor engine from a VAZ-2103 was installed on the car. Later, they began to install carburetor power units of 1.3 liters from the VAZ-2105 (VAZ-21072), 1.6 liters from the VAZ-2106 (VAZ-21074). 1.7-liter engines with injection (VAZ-21073) were exported. Regardless of the power plant, the placement of the engine marker for the VAZ-2107 is the same. Scheme for locating the motor marker:

The motor identifier is printed using the impact method and is geographically located on the platform of the engine frame. The process is automatic, the platform is located above the oil filter element. The marking is applied by a German device “Otto Borries”, the font is provided by the same company.

Location of identification information:

As for the VAZ 2107 identifier, it is applied using the impact method; you can look at it by looking into the engine compartment, on the lower shelf of the air supply box.

Signs of interrupted numbers

Where is the engine number on the VAZ 2114
? How to determine the broken number? The main approaches to determining the authenticity of a number plate:

Visual inspection. The simplest and not always reliable way. You can recognize broken license plates if the license plates have different depths, there are different spaces between the symbols, and the metal in the wine area is convex or concave. The factory symbols are the same and do not differ in size or shape. The original stamping assumes that the component numbers are applied simultaneously. Forensic scientists mount each symbol separately.

• You can recognize a broken number by its characteristic rattling sound. The original license plate remains motionless even under intense mechanical stress.
• Examination of paintwork. The paint in the license plate area should match the shade in the engine compartment and trunk area. If the license plate has been painted, it is noticeable even to the naked eye. Use solvent and if the paint changes color, it is obvious that the numbers are not original.
• Contacting an official dealership that services cars of a certain brand. It should be taken into account that the dealership has the right not to disclose confidential information until you are the owner of the vehicle. If they do not refuse you, then ask for a description of the car’s equipment and VIN code characteristics.
• One of the easiest ways to protect yourself from purchasing a stolen car is to ask the car owner to deregister the car in your presence. This procedure involves reconciling license plates and examining the vehicle using the traffic police database.
• Using the Autocode service is the fastest and easiest way. It is necessary to introduce state number or vin in the search bar and request an analysis of the car's history. In a matter of minutes, complete information about the operation of the car will be provided, including information about the theft (if such a fact exists).
• An examination of a car for broken license plates can be carried out at the State Traffic Inspectorate. At any traffic police post, you are required to provide this information upon your request. If you have friends in this area, you can contact them directly. Verifying the authenticity of a VIN code is a legal procedure.

If a car seller suggests you contact his expert, we do not recommend agreeing. As a rule, traders work in conjunction with people who do not provide reliable information on this issue. It is best to do the examination yourself with an independent expert.

Famous pickup truck

Renault Logan fuel filter: where is it located, replacement

For those who found a spacious, successful option, a car in a pickup body of any color was produced based on the VAZ 2107. It’s called the VIS-2345 pickup, but it’s also no longer being made. However, despite everything, it is still popular.

Read also: Which foglights are better to install on a VAZ 2114

This subcompact pickup truck is easy to drive, providing ample ability to carry as much stuff as you need. Even a refrigerator will fit into the wide isothermal booth.

The two-seater pickup truck has an injection engine. It reaches speeds of up to 110 km/h. Due to its convenience and unusual design, this type of body is very common in America and Europe - so it’s a pity that the creation of this model was stopped.

where it is and how to see it. Tut-number.ru

Where exactly is the engine number on the Lada Priora?

Since the number of vehicles exceeds conceivable values, the VAZ 2107 engine number is an individual identifier of the product. In order to somehow distinguish the released product, the manufacturer has developed a product labeling method. The information encrypted in the code is specific only to the car on which it is applied, so it is difficult to mislead or try to deceive an informed user.

VAZ-2107:

Why check the labeling?

When it comes to checking the engine number, some car enthusiasts are perplexed as to why these unnecessary manipulations are needed. Please note that only the factory marker can correctly identify the power unit. Of course, situations when these actions are necessary are rare, but it is better to prepare for them in advance.

Recently, information about the power unit number was entered into the vehicle passport. According to the new rules, such a record has not been made since 2011, however, this does not mean that the information should be neglected.

Engine VAZ-2107:

When carrying out an operation to purchase, register, or deregister a vehicle with government agencies, information about the engine, as well as the body number of the VAZ 2107, are entered into the information database. For a civil servant, this base is a priority, and discrepancies lead to problems. The lack of necessary papers, or damage to the license plates, leads to the fact that the legality of the purchase of a car or modification requires proof.

For these reasons, know where the engine or body number is located on a VAZ 2107 car. When remaking a car, install a power unit with the same characteristics and the same model that the factory supplied.

Where is the engine number of the VAZ 2107

The VAZ 2107 car is equipped with a number of engines. Initially, a 1.3-liter carburetor engine from a VAZ-2103 was installed on the car. Later, they began to install carburetor power units of 1.3 liters from the VAZ-2105 (VAZ-21072), 1.6 liters from the VAZ-2106 (VAZ-21074). 1.7-liter engines with injection (VAZ-21073) were exported. Regardless of the power plant, the placement of the engine marker for the VAZ-2107 is the same.

Scheme for locating the motor marker:

The motor identifier is printed using the impact method and is geographically located on the platform of the engine frame. The process is automatic, the platform is located above the oil filter element. The marking is applied by a German device “Otto Borries”, the font is provided by the same company.

Location of identification information:

As for the VAZ 2107 identifier, it is applied using the impact method; you can look at it by looking into the engine compartment, on the lower shelf of the air supply box.

Decoding the number

Until '87, the engine number was indicated by seven characters. After the production of power plants exceeded 10,000,000, numbering began from scratch. To determine which period the motor number belongs to, look at the date of creation of the frame.

Frame markings:

Here:

• “D” (“A”, “B”, “C”, “F”, “H”) – equipment used;
• “VAZ” is the name of the creator;
• 07 01 86 – date of release of the skeleton;
• “N” (“K”) – shift marker;
• 2108 – modification of the frame.

Modification and engine number:

Until '82, the VAZ 2107 identification number had 11, 12, 14, 15 characters. The last digits (7 pieces) are the product number in order. Manufacturer and modification, encoded in the first characters. The value separator is a five-pointed star.

• *VAZ * 2107 * 0000002 *
• *creator * car modification * product number in order *

Since '82, the ID number contains seventeen characters, enclosed by an asterisk.

Identifier:

Here:

• XTA – number of the creator in the international classification;
• 2106 – car model;
• 00 – reserve numbers, without information;
• C – Vehicle production, year;
• 0000001 – product number in order.

How to decrypt a number

Initially, the Volzhsky Automobile Plant used 7-digit numbers. However, in 1987, the 9,999,999th car rolled off the assembly line, after which a reset occurred. For this reason, in order to avoid confusion, in addition to the identifier, you should also take note of the production date.

Body marking has three attributes. The first line contains a Latin letter (from A to H), which indicates the type of installed equipment. Next comes the abbreviation of the enterprise (VAZ). The last line contains the date in the format “DD.MM.YY”. Following it, the letter designation of the shift is indicated (N or K) and the body type - 2107.

The engine number is written in two lines. At the top there is the model name (2107), and below is the actual identifier. Until the beginning of 1982, it contained from 11 to 15 characters. Moreover, only the last 7 characters were the serial number. The first numbers, separated by an asterisk, indicated the manufacturer and specific modification.

After the specified year, the number became 17 digits. In this case, the first three letters are XTA - the international code of the domestic automaker. Then the car model is given - 4 digits, that is, 2107. The next 2 positions are reserve, and in our case - two zeros. Next, a Latin letter is stamped, symbolizing the year (for example, 2000 is Y). The last 7 are the engine serial number.

Where are the body numbers on the VAZ-2110

Note.

The model year may not be the same as the calendar year.

useful tips for motorists

When using site materials, an active link to car-exotic.com is required!

• 1 Where is the VIN number of the VAZ 2110
• 2 General principles of decryption

Information tables and VIN numbers are required for vehicles, and you need to know where the engine number for the VAZ 2110 and other plates that are indicated in the vehicle’s technical passport are located. The VIN number displays basic information about the car and technical characteristics, so it is considered the main information table.

VAZ VIN decoding

Decoding the VIN code for VAZ cars

Example VIN code for a VAZ XTA210930Y2696785 car:

The first three letters ( XTA ) are the manufacturer’s index:

1 – geographical area (X – Europe); 2 – country (T – Russia); 3 – manufacturer (A – JSC “AVTOVAZ”);

The next six digits ( 210930 ) are the car model; letter of the Latin alphabet ( Y ) - code of the model year of the car (see table); the last seven digits (2696785) are the body number.

Cylinder numbering in the most common types of vehicles

Unfortunately, there are no generally accepted rules for numbering cylinders in automobile engines - each automaker uses its own system, which often differs even for different engines of the same automaker. Therefore, the most authoritative source for you in this matter should be the repair and operation manual for your specific car, or, in the absence of one, the knowledge of car repair professionals.

In inline 4 and 6 cylinder American engines, which are installed in rear-wheel drive vehicles and are located longitudinally, the first cylinder is usually located at the radiator, and the rest are numbered in order from the radiator to the vehicle interior. However, there are exceptions to this rule.

In transversely mounted V-twin engines in American cars, the main (first) cylinder is usually located in the bank closest to the passenger compartment, on the end closest to the driver. Behind it, in the row closest to the passenger compartment, there are odd-numbered cylinders, and in the row closest to the radiator, there are even cylinders. That is, in the row closest to the passenger compartment, counting from the driver, there are cylinders 1-3-5-7, and in the row closest to the radiator, counting from the driver, there are cylinders 2-4-6-8. This type of cylinder numbering can be found, for example, on the Jeep Cherokee.

On transversely mounted in-line 4-cylinder engines of French front-wheel drive cars, the cylinders are usually numbered from the flywheel, i.e. from the driver's side. In the case of V-shaped 6-cylinder engines (for example, on the Peugeot 607), the cylinders are numbered as follows - in the row closest to the radiator, from the driver to the passenger - 1-2-3, in the row closest to the passenger compartment, from the driver to the passenger - 4-5-6.

As you can see, information on the issues of cylinder numbering in the engines of various cars is very contradictory, so we remind you that the technical documentation for your car should be the ultimate truth in this matter.

VAZ classic - what kind of cars are they?

Replacing the engine
In terms of width and wheelbase, the VAZ classic is one of the smallest representatives of the subcompact urban class B. There is less space in the cabin than in any front-wheel drive Lada, but still the Zhiguli is more spacious than supermini A-class cars (such as Deo Matiz or Oka).

All "classic" models are essentially versions of the same car with minor changes, mainly in appearance and interior. The structure of the body, over the years of production, has not changed at all - the safety of the car has remained at the level of the mid-20th century. Manufacturing technology and quality of materials have also changed little, so the bodies of Zhiguli cars, even the latest versions, are characterized by extremely low corrosion resistance. The only way to protect a “classic” from rust is to not use it in winter. Otherwise, the Zhiguli will rust literally before our eyes.

By modern standards, the interior of the Zhiguli can only be called comfortable with a big stretch. At that time, they didn’t think about ergonomics on the VAZ, so trips in a “classic” for more than one hour could cause fatigue. However, the interior of the first versions had its own feature - it allowed you to transform into an almost flat bed, so it was quite comfortable to spend the night in the car. Finally, this feature was removed on the “seven”, when the headrests became an integral part of the back of the driver’s seat.

Even in a sedan, the trunk is very roomy - 350 liters. However, the top loading and high side reduce its practicality, preventing large items from being loaded into it.

What to do

In fact, the car conversion work will take you no more than 3-4 hours.

The algorithm will be as follows:

1. Dismantling of old equipment;
2. Sub-assembly of components before installation;
3. Direct installation and debugging of the injection system.

Dismantling work

Perform operations in strict sequence:

1. Disconnect the battery and remove it from the car;
2. Drain the coolant from the system;
3. Disconnect the fuel hose from the carburetor and turn it off, preventing gasoline from leaking out;
4. Disconnect the air filter housing;
5. We dismantle the carburetor;
6. Loosen the exhaust pipe clamp and unscrew the exhaust manifold;
7. Remove the intake manifold;
8. We unscrew the front cover of the engine, freeing access to the crankshaft pulley;
9. Remove the radiator fan.

Adjustment process

After connecting the laptop to the car’s on-board computer, you have the opportunity to monitor all the parameters of the vehicle in its various systems and see a list of errors that negatively affect the operation of the internal combustion engine. To identify errors, the data obtained in this way must be checked against the basic parameters. In most cases, the program itself indicates a deviation from the norm. If not, then you need to look for the error by its code in the catalog.

After determining the causes of deviations from the norm, errors can be easily eliminated by adjusting certain parameters that affect the operation of the injector.

Identification numbers of VAZ (Zhiguli) cars

On VAZ cars, the identification number (VIN) is stamped and located in the engine compartment:

• VAZ-2101, VAZ-21011, VAZ-21013, VAZ-2102, VAZ-2103, VAZ-2104, VAZ-2105, VAZ-2106, VAZ-2107 and their modifications - on the bottom shelf of the air supply box on the right in the direction of travel
• VAZ-2108, VAZ-2109, VAZ-2110 – on the upper surface of the right pillar of the body mudguard (on the right front suspension spring support)
• VAZ-2121 - on the upper amplifier of the front panel on the right. In addition, there are options for the following location - on the upper reinforcement of the radiator trim panel, on the front panel next to the nameplate

For the first five years since the start of production of VAZ cars (1970-1975), the vehicle identification number was applied to the vertical wall of the air intake box on the right in the direction of travel.

The identification number (VIN) on VAZ cars produced before 1982 consisted of 11, 12, 14 and 15 characters. The last seven digital characters indicated the serial number of the product, and the first seven (eight) alphanumeric characters or four (five) digital characters, respectively, either the manufacturer and the car model, or the car model. Dividing marks are made in the form of five-pointed stars.

★ 2101 ★ 0000001 ★ II III I — manufacturer II — car model III — product serial number

Since 1982, the vehicle identification number consists of seventeen 10 mm high characters and is enclosed between two asterisks.

The distance between the conventional centers of dividing signs is 106-107 mm, the height of the signs is 10 mm, the width of the signs is 4 mm, the distance between the signs is 2 mm.

I - number of the world manufacturer II - car model III - signs that do not carry information (no meaning) IV - year of manufacture of the car V - serial number of the product

The body for spare parts is always produced with its own number (seventeen characters), and the marked parts of the body for spare parts are produced without a number.

VAZ 2105 | Vehicle and Engine Identification Numbers

Vehicle and Engine Identification Numbers

Engine number on Priora 16 valves photo

An official discussion of the Lada Priora question where the engine number is located, answers from two users are available on the site. Instructions and video response are available.

Video quality: HDTVRip

The video was uploaded to the admin from the user Agafangel: for immediate viewing on the portal.

To give the correct answer to the question you need to watch the video. After viewing, you will not need to seek help from specialists. Detailed instructions will help you solve your problems. Enjoy watching.

Humor on topic: When Rosa Lvovna stopped eating after six, she began to chew on Semyon Markovich after seven.

VIN structure Improvement of manufactured products is a continuous process of any continuous production. At the same time, with the exception of cases of major changes in the design of models coming off the assembly line, the results of the modification process are not covered in the vehicle’s operating manual. However, the manufacturer draws up numbered lists of manufactured spare parts, which is why the information encoded in the vehicle identification numbers is of particular importance when purchasing the latter. When placing an order for the necessary spare part, try to provide the seller with as much information as possible about your car. Be sure to provide the model name, year of manufacture, as well as body and power unit numbers.

1. The chassis number is stamped on the front panel of the car body.
2. The engine number is stamped on the cylinder block.
3. The transmission number plate is attached to the top of the transmission housing.

Don't confuse the transmission number with the engine number.

VEHICLES WITH 5 DOOR HATCHBACK

There is no chassis number on the front cross member (above the radiator).

On some modifications of the car, the chassis and engine numbers are duplicated on a plate that is attached to the front panel of the body.

On other modifications of the car, a plate with the chassis number is located on the front cross member of the body (above the radiator).

Some vehicle options include a certification plate located on the rear end of the driver's door.

VEHICLES WITH 5 DOOR HATCHBACK

There is no certification plate on the end of the driver's door.

Vehicle Identification Number (VIN)

This extremely important number is stamped on the rear bulkhead of the engine compartment, as well as on a nameplate mounted on the instrument panel under the windshield on the driver's side of the car. The VIN is also entered into the vehicle title and registration certificate. The number contains information about the date/place of manufacture and body type of the car (see accompanying illustration).

Engine code and model year

The two main components of the VIN are the model year code and the assembly line/body/engine code.

Counting from left to right, the 4th, 5th and 6th positions of the number are assigned to the assembly/body/engine line code. Thus, Civic models are determined by the following combinations:

EJ6 = 3-door/D16Y7 EJ7 = 2-door/D16Y5 EJ8 = 4-door/D16Y8

Integra models are characterized by combinations:

DB7 = 4-door/B18B1 DB8 = 4-door/B18С1 DC2 = 3-door/В18С1, В18С5 DC4 = 3-door/В18В1

The tenth position of the VIN determines the year of manufacture of the model:

R = 1994 S = 1995 T = 1996 V = 1997 W = 1998

The engine number, which is impossible to do without when ordering spare parts for the power unit, is located on the right (on the passenger side of the car) on the block, next to the exhaust manifold. The first five positions of the number determine the engine code. This manual covers models equipped with the following four engine types:

D16Y5 = 1.6 l, SOHC, 16-valve, VTEC-E D16Y7 = 1.6 l, SOHC, 16-valve D16Y7 = 1.6 l, SOHC, 16-valve, VTEC

В18В1 = 1.8 l, DOHC, 16-valve В18С1 = 1.8 l, SOHC, 16-valve, VTEC В18С5 = 1.8 l, DOHC, 16-valve, VTEC

This number is required when ordering spare parts for transmission line repair. On models equipped with a manual transmission, the transmission number is stamped on the clutch dome, next to the starter. On models with AT, the number is located on the right front of the transmission housing, near the dipstick. On models equipped with CVT, the number is located on a vertical platform, also near the dipstick.

how to determine the type of engine where the engine number is stamped

shafts sti 3.1 photo

The simplest and fairly standard method to increase the power of a VAZ 2112 engine is to change the camshafts to STI-1 (for a standard receiver), STI-3.1, STI-2 or Stolnikov 8.9 (more expensive than others), to make life easier for the engine, we install a light ShPG from the 126 engine , throttle body 54-56 mm, from an outboard receiver and ejection 4-2-1. At the output we have about 120 hp. Refinement of the cylinder head and evil wide-phase shafts can increase power to 130-140 or more hp. To this it is worth adding a crankshaft with a stroke of 75.6 in order to increase the volume of the VAZ 2112 engine to 1.6 liters, lightweight T-shaped valves, modification of the cylinder head and intake manifold, at the output we get about 140-150 hp. For a small town, these characteristics are enough for almost any car owner. Installing a compressor on a VAZ 2112

compressor for vaz 2112 autoturbo

Another way to modify the 2112 engine and obtain identical power is to install a compressor. In a well-known video clip, it is clearly explained to our client what is required for the successful implementation of the project using the example of an eight-valve engine, this compressor is possibly installed on a 16-valve engine, the output of the engine will be more than 130 hp. Other compressors are also used, but blowing more than just 0.5 bar into a standard engine, without lowering the compression ratio, is risky.

Throttle for VAZ 2112

4 throttles for 2112 photos

To increase the stability of the engine and the response of the accelerator pedal, install 4 throttles. The essence is that each cylinder receives its own throttle valve and therefore the resonant air vibrations between the cylinders disappear. We have a more measured engine operation from bottom to top; in addition, the intake is shorter and air enters the cylinders very quickly. The most popular way is to install a 4-throttle intake from Toyota Levin on a VAZ. You need to purchase: the unit itself, make an adapter manifold and pipes, in addition to this you need a zero filter, injectors, MAP (absolute pressure sensor), fuel pressure regulator and firmware. There are also ready-made 4-throttle intake kits available for sale that are fully usable. It is recommended to install a light piston engine (from Priora, for example), because turning a languid piston is an additional waste of energy, wide-phase shafts, for example STI-6 or STI-7 Touring Light, a modified cylinder head with light valves and solid pushers, Opel C20XE springs, spider ejection 4-1, as it is also called 4-2-1 on the 51st, or better yet 63rd pipe.

Detailed diagram of the machine

The bumper elements are made of plastic, attached with brackets, and have chrome trim.

There is a lot of space inside the car. The front seats have adjustable backrest and longitudinal position. The rear seat is three-seater.

What remains for our client to do is that the glass is of a non-hazardous type, and the intelligent structure of the car will ensure a reduction in impact in an accident.

Where is the Body Number of the VAZ 2104 ~ AUTOINTERLINE.RU

Where is the identification and duplicate body number of the Lada Granta

When registering, the traffic police inspector will check the body number in the documents (car title) with the real one, which is duplicated on the body. Also, when purchasing a car, we advise you to check these numbers and visually inspect the place where they are applied to the body.

Where is the body number?

Body number

is located under the hood. Duplicated in 2 places.

1. The number is stamped on the body next to the “glass” on the right support of the car.

Body number on the support

Body number on the nameplate

VAZ 2104

1998 wines 80601 Ivanovo, Prigorodnaya St., 22A.

Interrupted vehicle body and engine numbers

Number

located on the platform, on the cylinder block. Between 3 and 4 candles. There may be placement on the platform below.

Since you’ve already gotten into the trunk, we recommend installing a net there; more details about what it really is, how to install a net in the trunk, can be found here.

When I registered it, I found the body number in the usual place for AvtoVAZ. This place is the trunk niche for the spare tire; this place was the number on all my previous Lada models (VAZ-2109, VAZ-2114, VAZ-2115, LADA PRIORA).

In a Lada Granta car there is no body number in the trunk niche!

Is there a body number in the cabin?

Before going and registering the car, I read on the Internet that there is a duplicate number in the car interior under the rear seat in the center. It is also written that you need to lower the backrest, remove the upholstery from the seal or find a slot in the upholstery, there will be a number under the occupied one.

This information is not correct, on a Lada Granta

In the configuration the norm in many places
body number
!

Under the upholstery

Where and in what place is the number located?

So, as mentioned above, there are no clear standards and rules for the location of rooms. Although there are, so to speak, unspoken generally accepted canons, which imply the placement of Vins on the following areas of the body.

1. In the area of ​​the windshield.
2. Near the driver's door, usually on the threshold.
3. On the dashboard.

There are also other options for number placement, carried out at the discretion of the manufacturer.

Security code on the body of a VAZ car

The security code is a combination stamped on the certificate. label or plate. As a rule, there are also several ways to apply the code. This can be laser application, embossing, etc.

It is also useful to know that the height of the plate and label are different. For example, for the chassis, body and frame, the plate must extend to a height of 7 mm, and for labels - at least 4 mm.

Note. Vin is usually applied in one or two rows. Although in the documents the code is in one row and without spaces.

What engines is the VAZ 2107 equipped with?

The VAZ 2107 model was produced from 1982 to 2012. Over the 30 years of its existence, the car has been repeatedly refined and changed to more accurately meet modern requirements. Initially, the “seven” was conceived as a small-class rear-wheel drive car in a sedan body. However, in some countries the VAZ 2107 was refined and modified, which is why it can be considered a universal car model.

Depending on the year of manufacture and the country of origin (at different times, the VAZ 2107 was produced not only by the Russian AvtoVAZ, but also by factories in European and Asian countries), the model was equipped with different types of propulsion systems:

• LADA-2107 (engine 2103, 1.5 l, 8 cells, carburetor);
• LADA-21072 (engine 2105, 1.3 l, 8 cl., carburetor, timing belt drive);
• LADA-21073 (engine 1.7 l, 8 cells, mono injection - export version for the European market);
• LADA-21074 (engine 2106, 1.6 l, 8 cl., carburetor);
• LADA-21070 (engine 2103, 1.5 l, 8 cl., carburetor);
• LADA-2107–20 (engine 2104, 1.5 l, 8 cells, distributed injection, Euro-2);
• LADA-2107–71 (engine 1.4 l, 66 hp, engine 21034 for A-76 gasoline, version for China);
• LADA-21074–20 (engine 21067–10, 1.6 l, 8 cl., distributed injection, Euro-2);
• LADA-21074–30 (engine 21067–20, 1.6 l, 8 cl., distributed injection, Euro-3);
• LADA-210740 (engine 21067, 1.6 l, 53 kW/72.7 hp 8 cells, injector, catalyst) (2007);
• LADA-21077 (engine 2105, 1.3 l, 8 cl., carburetor, timing belt drive - export version for the UK);
• LADA-21078 (engine 2106, 1.6 l, 8 cl., carburetor - export version for the UK);
• LADA-21079 (rotary piston engine 1.3 l, 140 hp, originally created for the needs of the Ministry of Internal Affairs and the KGB);
• LADA-2107 ZNG (engine 21213, 1.7 l, 8 cells, central injection).

Technical characteristics of VAZ 2107 (carburetor)

The VAZ 2107 was initially equipped with a 1.5 and 1.6 liter carburetor. In the USSR in the 1980–1990s, almost all produced models were equipped with engines of this size - this power was quite enough for trips around the city and country roads. The engine uses AI-92 gasoline to create the air-fuel mixture. There were also 1.3 and 1.2 liter carburetors, but they were not particularly popular.

Distinctive features of the VAZ 2106 engine

The VAZ 2106 engine is a fairly successful modification of the previous version of the VAZ-2103 engine, during the creation of which modern technologies were used.
Manufacturers have set themselves the task of improving the finished part by any means:

Power was increased using the total effective engine volume

Particular attention was paid to improving the cylinder. Such modifications influenced the appearance of the cylinder block 2106-1002011. Apart from the diameter, the presented motor design no longer has any distinctive features. During the production process, experts give each cylinder its own class.

Today there are about five names that differ by one millimeter. They are assigned the following symbols - A, B, C, D and E. You can see the conditional class of the motor at the bottom of the base. The main head of the motor block with the designation 21011-1005011-10 was left unchanged. To change the overall diameter of the cylinder, manufacturers had to use new gaskets. Absolutely all standard and generally accepted pistons have many similar characteristics to each other. The presented engine is equipped with pistons from the 21011 engine, where the nominal diameter is 79 millimeters.

The new motor model has cylindrical holes, and the volumes have been improved several times. During operation in each individual area, absolutely all pistons will heat up gradually and evenly. This is how it was possible to compensate for possible thermal deformations. Manufacturers also placed temperature-control plates made of high-quality steel in the piston bosses.

How to increase the power of a VAZ 2106 engine and minimize all kinds of dynamic loads on the piston part of the engine? You need to pay attention to the presence of a hole that is intended only for the piston pins

Where exactly is the engine number?

The VAZ model 2107 was supplied to the market with several power units. The first cars rolled off the assembly line with engines of the carburetor system, which also went to the Zhiguli 2103 model. Later they were replaced by units used on the VAZ-2105 and 2106. All of them had a volume of 1.3 liters. Moreover, in export versions more powerful engines were used - 1.7 liters.

Regardless of the engine type, its identifier must always be in one of three places. The digital sequence is applied using the impact method, a special machine and a special font.

The engine number of the 2107 model is most often found on the left side (in the direction of travel) of the cylinder block. For cars produced after 2000, you should look for it in the oil filter area, on the right.

If there is no identifier in any of the specified locations, then all that remains is to inspect the area of ​​the block adjacent to the air duct. There are no more options.

Searching for information on a surface contaminated with dust and grease is quite difficult. To make the task easier, first wipe the area with a cloth soaked in gasoline. It is recommended to carry out this procedure with special care before registering the vehicle with the State Traffic Inspectorate.